Contact Information: 1-800-991-7026 | 1-919-372-8413 | sales@automationindustrial.com
FREE DOMESTIC GROUND SHIPPING! (see shipping policies below for more details)
ALL ORDERS SHIP SAME DAY! (if placed before 3PM EST)
- Unit Code: F4-SDN
- Produced By: Facts Engineering
- Family: DirectLogic 405
- Category: Coprocessor
- Version: Shared Data Network
- Communication Rate: 250Kbps
- Electrical Interface: RS-485
- Wire Configuration: Three-Wire
- Maximum Link Distance: 4000ft
- Error Detection: Address Recognition Hardware
- Cyclic Redundancy Check: 16-bit
- Manual: F4-SDN-M
-
How much time is added to the PLC scan rate with the F4-SDN installed?
- The F4-SDN only adds between 4 and 28 milliseconds to this scan time.
-
Where can the F4-SDN be installed?
- The F4-SDN must be installed in the CPU base.
-
How many F4-SDN modules can be used in a single system?
- Up to 2 of these modules are supported on a single system.
⭐⭐⭐⭐⭐ 5.0
The F4-SDN is a vital module to have up and running if your system is communicating over a ShareNET type network. This module acts as a communications card and coprocessor, helping free up some system memory with minimal impact on scan speed. -Automation Industrial Quality Assurance Manager
Description
General Information about the Product | |
Part Number |
F4-SDN f4 |
Description |
F4-SDN by Facts Engineering Shared Data Network Module DL405 DirectLOGIC 405 |
Condition |
Pre-Owned Cleaned and Tested. With 1 Year Warranty |
Technical Specifications | |
| Unit Code | F4-SDN |
| Produced By | Facts Engineering |
| Family | DirectLogic 405 |
| Category | Coprocessor |
| Version | Shared Data Network |
| Communication Rate | 250Kbps |
| Electrical Interface | RS-485 |
| Wire Configuration | Three-Wire |
| Maximum Link Distance | 4000ft |
| Error Detection | Address Recognition Hardware |
| Cyclic Redundancy Check | 16-bit |
| Manual | F4-SDN-M |
Frequently Asked Questions | |
| How much time is added to the PLC scan rate with the F4-SDN installed? The F4-SDN only adds between 4 and 28 milliseconds to this scan time. | |
| Where can the F4-SDN be installed? The F4-SDN must be installed in the CPU base. | |
| How many F4-SDN modules can be used in a single system? Up to 2 of these modules are supported on a single system. | |
Internal Review | |
|
⭐⭐⭐⭐⭐
5.0
The F4-SDN is a vital module to have up and running if your system is communicating over a ShareNET type network. This module acts as a communications card and coprocessor, helping free up some system memory with minimal impact on scan speed. -Automation Industrial Quality Assurance Manager |
|
Policies and Procedures
Shipping |
We offer FREE DOMESTIC GROUND SHIPPING on all orders unless otherwise specified. In addition to FREE DOMESTIC GROUND SHIPPING we offer UPS Next Day Air Early AM, UPS Next Day Air, UPS 2nd Day Air, and UPS 3-day Select (when applicable). Please contact us at (919) 372-8413 prior to purchase if you would like urgent shipping via any of the above expedited options. |
Returns |
All products ordered from Automation Industrial will come with our 1 YEAR WARRANTY. Any item(s) found to be defective through normal use and wear within 1 Year from the date of receipt are covered under warranty. |
Contact Us |
Contact us at 919-372-8413 or kindly submit a message via the website submission form. We look forward to hearing from you! |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Recently viewed
- Opens in a new window.
